Question or request?     EMAIL us at: awesomecollectables@gmail.com SEARCH
Price Category: Diecast Models $51 to $100 

 

  • 1/72 A6M3 Zero Rabaul Flying Group
    1/72 A6M3 Zero Rabaul Flying Group
    Mitsubishi A6M3 Zero, the primary Japanese Naval fighter in World War II. This carrier-based fighter was highly manoeuvrable and armed with a formidable array of two 20mm cannons and two 7.7mm machine guns. Zeros were used in the attack on Pearl Harbor in 1941 and became infamous for their Kamikaze attacks on allied shipping later in the war. Iconic model. Rotating prop, drop tank, pilot figure, and comes with a display stand. Approx 12.5cm x 15cm (5" x 6").
    NZ$ 69.00 Each
  • 1/24 1970 Mustang Boss 302
    1/24 1970 Mustang Boss 302
    Ford Mustang Boss 302 Drag Car. Very cool model with opening doors & bonnet. Sits on a display base. Approx 197mm x 64mm x 50mm (7.75" x 2.5" x 2").
    NZ$ 89.00 Each
    NZ$ 75.00 Each
  • 1/10 2017 RC213V #93 World Champ
    1/10 2017 RC213V #93 World Champ
    Honda RC213V Team Honda Repsol #93. Marc Marquez, 2017 MotoGP Season World Champion. Die cast metal tank, plastic frame and fairings. Rubber tyres, working rear suspension, and working steering. Removable bike stand. Approx. 20cm x 11.5cm x 8.5cm (8" x 4.5" x 3.25").
    NZ$ 69.00 Each
  • 1/36 Little Nellie Gyrocopter
    1/36 Little Nellie Gyrocopter
    50th Anniversary special edition James Bond autogyro as featured in the 1967 movie "You Only Live Twice". "Little Nellie" was heavily armed, with two forward-firing machine guns in the nose, two sets of rear-facing twin flamethrowers, small-cluster rocket launchers each side of the cockpit, twin heat-seeking air-to-air missiles fixed under the body, and a payload of aerial mines for ground targets. That's a whole lot of Nellie!! She also had a top speed of 100 mph and a range of 130 miles. This lethal little package could be disassembled to fit into four suitcases, and shipped far and wide. An iconic model from a Bond classic. Rotor span 208mm (8.25"), body approx. 110mm x 55mm x 65mm (4.25" x 2.25" x 2.5").
    NZ$ 59.00 Each
  • 1/43 1950 Kenworth Bullnose
    1/43 1950 Kenworth Bullnose
    Classic 50's Kenworth Bullnose with sleeper cab. Heavy-duty commercial rig, much loved for its durability and engineering ingenuity. Approx. 13.5cm x 6.5cm x 7cm (5.25" x 2.5" x 2.75"). Comes with an acrylic display case.
    NZ$ 75.00 Each
  • 1/43 1953 Scania 110 Super
    1/43 1953 Scania 110 Super
    1950's classic trucking. Brilliant livery and detail. A Swedish beauty. Approx. 14.5cm x 5.5cm x 5.5cm (5.75" x 2.25" x 2.25"). Comes with an acrylic display case
    NZ$ 69.00 Each
  • 1/43 1954 GMC 950 COE
    1/43 1954 GMC 950 COE
    Old school two axle GMC Cab Over Engine 6-wheel heavy truck. Metal diecast. Approx. 11.5cm (4.54") long. Comes in an acrylic display case.
    NZ$ 69.00 Each
  • 1/43 1971 MAN 19.280H
    1/43 1971 MAN 19.280H
    MAN 19.280H. 1970's German heavyweight. Diecast metal with some plastic parts. Approx. 14cm x 5cm (5.5" x 2"). Comes with an acrylic display case.
    NZ$ 69.00 Each
  • 1/43 1979 Peterbilt Pacemaker 352 Red & White
    1/43 1979 Peterbilt Pacemaker 352 Red & White
    Peterbilt 352 tilt-cab COE. Nicknamed "Pacemaker". 1970's US heavy truck, finished in a very smart red and white trim. Beautiful! Diecast metal with some plastic parts. Approx. 14cm x 7cm (5.5" x 2.75"). Comes with an acrylic display case.
    NZ$ 75.00 Each
  • 1/43 1980 GMC General
    1/43 1980 GMC General
    The GMC General heavy-duty semi truck, with tandem rear axles and sleeper. Produced by the GMC Truck and Coach Division of General Motors from 1977 to 1987. The largest conventional-cab truck ever produced by the company. That is a big chunk of metal. Looking stunning (and chunky) in black and red. Diecast metal, approx. 18.5cm x 6cm (7.25" x 2.5"). Comes with an acrylic display case.
    NZ$ 75.00 Each
  • 1/43 1993 Freightliner
    1/43 1993 Freightliner
    Freightliner FLA COE Prime Mover. American 90's heavy metal, looking good in black and multi-tone blue with silver-grey detailing. Approx. 16cm x 7cm (6.25" x 2.75"). Comes in an acrylic display case.
    NZ$ 75.00 Each
  • 1/64 1990's Calsonic R32 Set
    1/64 1990's Calsonic R32 Set
    Nissan Skyline GT-R (R32) four-car set of the Group A Calsonic Japan Touring Car Championship winners for 1990, 1991, 1992, and 1993. Set consists of: 1 x MGT00165-R 1990 Champ, 1 x MGT00166-R 1991 Champ, 1 x MGT00167-R 1992 Champ, 1 x MGT00104-R 1993 Champ. Each car approx. 7cm long.
    NZ$ 90.00 Four Piece Set
  • 1/64 Hapag Lloyd Container
    1/64 Hapag Lloyd Container
    Hapag Lloyd 40ft Dry Container. Full die-cast metal construction, with opening doors (no plastic parts). Detailed exterior, and painted interior. 19cm long (7.5") and weighs just under 400 grams. Compatible with MGT00597-L 1/64 Western Star 49X Container Semi.
    NZ$ 63.00 Each
  • 1/64 Maersk Container
    1/64 Maersk Container
    Maersk 40ft Dry Container. Full die-cast metal construction, with opening doors (no plastic parts). Detailed exterior, and painted interior. 19cm long (7.5") and weighs just under 400 grams. Compatible with MGT00597-L 1/64 Western Star 49X Container Semi.
    NZ$ 63.00 Each
  • 1/72 1943 DH Mosquito Mk II
    1/72 1943 DH Mosquito Mk II
    De Havilland Mosquito Mk II Night Fighter, YP-S, DD670, 23 Squadron RAF. Looking absolutely mean in black (photos 2 & 3 don't do it justice). Diecast metal model with some plastic parts. Fixed, non-spinning propellers. No pilot figures. Landing gear is permanently retracted. Comes with a display stand. Approx. 18cm x 22cm (7" x 8.75").
    NZ$ 56.00 Each
  • 1/76 British Rail Van Set
    1/76 British Rail Van Set
    British Railways pale cream and crimson ("blood and custard") five van set, made up of: 1 x 76AK016 Austin K8, 1 x 76ANG037 Ford Anglia Van, 1 x 76LAN2001 Land Rover Series II 109 Hard Top, 1 x 76CA018 Bedford CA Minibus, 1 x 76CM001 Commer Q25. Each model is finished with its own number plate and BR markings. The set comes mounted within a single acrylic case. Models range in length from just under 5cm (2") to just over 6cm (2.5"). A great addition to any British Rail collection.
    NZ$ 65.00 Five Piece Set
  • 1/76 Komatsu 340
    1/76 Komatsu 340
    Komatsu 340 Stobart Rail Excavator, with long boom. Diecast metal with working boom, jib, and bucket. Detailed cab, deck, and livery. Great for rail and construction layouts. Main body approx. 8cm x 5cm x 4cm (3.25" x 2" x 1.5"). Bucket reach approx. 23cm (9").
    NZ$ 69.00 Each

«Prev12


All our prices are in New Zealand dollars (NZ$) and include 15% Goods and Services Tax (GST). Available payment options are Internet Banking, POLi, afterpay, and Stripe (Amex, Mastercard, Visa).